Frequently Asked Questions

When dry the figures have a satin rather than matt finish?

You are holding the spray too close to the target. Move the spray further away from the target to around 18”/45cm). Re spraying your figures at the correct distance will correct the problem, leaving a matt finish.

Will the Spray block the spray nozzle if left for any length of time?

 We have never had any instances of this occurring but if you want to make doubly sure when you finish spraying up end the can and give a quick burst this will send a little gas through the nozzle and blow out any residual varnish.

Can I store the Can in a Drawer between uses?

We do not recommend storing Warrior Spray on its side. Being a pressurised canister this can lead to pressure being lost. Keep the can upright when storing.